P0743

DTC P0743/DTC NO. 25 OR 26 TCC SOLENOID ELECTRICAL





WIRING DIAGRAM





DTC DETECTING CONDITION AND TROUBLE AREA





DTC CONFIRMATION PROCEDURE

1. Turn ignition switch OFF.
2. Clear DTC stored in TCM and ECM.
3. Start engine and warm it up to normal operating temperature.
4. Drive vehicle at 4th gear in "D" range (throttle opening: less than 40%, vehicle speed: over 60 mph, 100 km/h) for 10 sec. or longer.
5. Stop vehicle and check DTC and pending DTC.





TROUBLESHOOTING (DTC P0743/DTC NO. 25 OR 26)