DTC 24

CAUTION:
- When measurements are requested in this table use specified digital multimeter with correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is requested refer to INTERMITTENT AND POOR CONNECTIONS.
- When an open in air bag wire harness, damaged wire harness, connector or terminal is found, replace wire harness, connectors and terminals as an assembly.

DTC WILL SET WHEN:
The voltage measured at driver initiator circuit or passenger initiator circuit is below a specified value for specified time.

DTC TABLE DESCRIPTION: Number(s) below refer to circled number(s) on the diagnostic table.
1. This test determines whether the malfunction is occurring in the driver air bag (inflator) module circuitry.
2. This test determines whether the malfunction is occurring in the passenger air bag (inflator) module circuitry.
3. This test determines whether the malfunction is in the driver air bag (inflator) module or the contact coil assembly.
4. This test checks for a short from "Driver Side Low" to ground.
5. This test checks for a short from "Driver Side High" to ground.
6. This test checks for a short from "Passenger Side Low" to ground.
7. This test checks for a short from "Passenger Side High" to ground.

Step 1 - 5:

Step 6 - 7: