P0720

DTC P0720 OUTPUT SPEED SENSOR (VSS) CIRCUIT MALFUNCTION

CIRCUIT DESCRIPTION





Refer to "General Description".

DTC CONFIRMATION PROCEDURE

WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and a tester, on a level road.

1. Turn ignition switch OFF and then ON.
2. Clear DTC, shift selector lever to "2" range and drive vehicle at 3500 r/min engine speed for 3.5 seconds.
3. Stop vehicle and check DTC.





DTC P0720