P0756

DTC P0756 SHIFT SOLENOID-B (#2) PERFORMANCE OR STUCK OFF
CIRCUIT DESCRIPTION








PCM monitors throttle opening, engine speed, vehicle speed and gear position and compares the actual engine speed and its specified value (i.e., engine speed obtained by PCM through calculation using the throttle opening/gear position and vehicle speed).

DTC CONFIRMATION PROCEDURE

WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and a tester, on a level road.

1. Turn ignition switch OFF.
2. Clear DTC with ignition switch ON and warm up engine to normal operating temperature.
3. Shift selector lever to "D" range.
4. Start vehicle and increase vehicle speed to 25 - 35 mph, 40 - 55 km/h by depressing accelerator pedal half a stroke.
5. Keep vehicle at above speed for 5 seconds or longer.
6. Increase vehicle speed to 45 - 55 mph, 75 - 90 km/h by depressing accelerator pedal half a stroke and keep it at that speed for 5 seconds or longer.
7. Stop vehicle and check pending DTC and DTC.

DTC P0751/P0756





INSPECTION