P0112

DTC P0112: Intake Air Temperature (IAT) Circuit Low Input

Wiring Diagram:

Wiring Diagram

Detection Condition / Possible Causes:

DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure

NOTE: Check to make sure that the following conditions are satisfied when using this DTC Confirmation Procedure.
- Intake air temperature: -14 °C, 6.8 °F or higher
- Altitude (barometric pressure): 2400 m, 8000 ft or less (560 mmHg, 75 kPa or more)

1. With ignition switch OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC using scan tool.
3. Start engine and run it for 10 sec.
4. Check DTC and pending DTC.

Steps 1 - 3:

DTC Troubleshooting