P0500
DTC P0500: Vehicle Speed SensorWiring Diagram:
Wiring Diagram
DTC Detecting Condition and Trouble Area
DTC Confirmation Procedure
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester.
1. With ignition switch turned OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC using scan tool.
3. Warm up engine to normal operating temperature.
4. Increase vehicle speed to 50 mph, 80 km/h. (O/D switch OFF) (for A/T vehicle only)
5. Release accelerator pedal and with engine brake applied, keep vehicle coasting for 6 sec. or more (fuel cut condition for 2 sec. or more) and stop vehicle.
6. Check pending DTC and DTC.
Step 1 - 7:
Step 7 (Continued) - 14:
Step 14 (Continued):
DTC Troubleshooting