P2227

DTC P2227: Barometric Pressure Circuit Range Performance / Low / High

System Description
Barometric pressure sensor is installed in ECM.




DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure

NOTE: Check to make sure that the following conditions are satisfied when using this "DTC confirmation procedure".
- Intake air temp.: Between -10 degrees C and 45 degrees C (14 degrees F and 113 degrees F)
- Altitude (barometric pressure): 2500 m, 8202 ft or less (560 mmHg, 75 kPa or more)

1. With ignition switch turned OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC using scan tool.
3. Start engine and warm up to normal operating temperature.
4. Run engine at idle speed for 60 sec. or more.
5. Check DTC and pending DTC.

Step 1 - 3:

DTC Troubleshooting