"AIR BAG" Warning Lamp Cannot Indicate Flashing
"AIR BAG" Warning Lamp Cannot Indicate FlashingWiring Diagram:
Wiring Diagram
CAUTION:
- Be sure to perform Air Bag Diagnostic System Check:Except Advanced Air Bag before starting diagnosis according to flow table. Air Bag Diagnostic System Check
- When measurement of resistance or voltage is required in this flow, use a specified digital multimeter (Refer to Special Tool:Except Advanced Air Bag.) along with a correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is required, refer to Inspection of Intermittents and Poor Connections:Except Advanced Air Bag. Inspection of Intermittents and Poor Connections
- If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace the wire harness, connector and terminal as an assembly.
Flow Test Description
STEP 1: Check for loose connection between diagnosis switch terminal and ground terminal by service wire.
STEP 2: Check for open circuit in diagnosis switch circuit.
Step 1 - 2:
Troubleshooting