P0328

DTC P0327 / P0328: Knock Sensor Circuit Low / High

Wiring Diagram

Wiring Diagram:

DTC Detecting Condition and Trouble Area

DTC Detecting Condition And Trouble Area:

DTC Confirmation Procedure

NOTE: Check to make sure that the following conditions are satisfied when using this "DTC Confirmation Procedure".
^ The following DTCs are not detected: DTCs related to starter relay

1. Connect scan tool to DLC with ignition switch turned OFF.
2. Turn ON ignition switch and clear DTC pending DTC and freeze frame data by using scan tool.
3. Start engine and run it for 1 minute.
4. Check DTC.

DTC Troubleshooting

Step 1-3: