Fan 2 Control Circuit (Non-EVAP-Leak-Check Model)
DTC P0481: Fan 2 Control Circuit (Non-EVAP-Leak-Check Model)Wiring Diagram
Wiring Diagram:
DTC Detecting Condition and Trouble Area
DTC Detecting Condition And Trouble Area:
DTC Confirmation Procedure
1. With ignition switch turned OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool.
3. Start engine and run it at idle speed.
4. Select blower selector at 1st position or more.
5. Turn on A/C switch.
6. Wait until A/C condenser fan stops.
7. Check DTC and pending DTC.
DTC Troubleshooting