P0335

DTC P0335: Crankshaft Position Sensor A Circuit

Wiring Diagram

Wiring Diagram:

DTC Detecting Condition and Trouble Area

DTC Detecting Condition And Trouble Area:

DTC Confirmation Procedure

NOTE: Check to make sure that the following conditions are satisfied when using this "DTC Confirmation Procedure".
^ The following DTCs are not detected: DTCs related to starter relay

1. With ignition switch OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool.
3. Crank engine for 3 - 5 sec.
4. Check DTC.

DTC Troubleshooting

Step 1-3:

Step 4-5: