P0443
DTC P0443: EVAP Emission System Purge Control Valve CircuitWiring Diagram
Wiring Diagram:
DTC Detecting Condition and Trouble Area
DTC Detecting Condition And Trouble Area - EVAP Leak Check Model:
DTC Detecting Condition And Trouble Area - Non-EVAP-Leak-Check Model:
DTC Confirmation Procedure
WARNING:
^ When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
^ Road test should be carried out with 2 persons, a driver and a tester, on a level road.
1. With ignition switch turned OFF, connect scan tool.
2. Turn ON ignition switch and clear DTC by using scan tool.
3. Start engine and warm it up to normal operating temperature.
4. Drive vehicle at more than 40 km/h (25 mph) for 5 min. or more.
5. Stop vehicle and check DTC and pending DTC.
DTC Troubleshooting
