Operation CHARM: Car repair manuals for everyone.

Initial Inspection and Diagnostic Overview




Immobilizer Control System Check

1. Immobilizer indicator light ON check

Turn ignition switch to ON position using ignition key.

Does immobilizer indicator light come on?
YES -
Go to Step 2.
NO -
Go to Immobilizer Indicator Light Does Not Come ON with Ignition Switch ON and Engine Stop Immobilizer Indicator Light Does Not Come ON with Ignition Switch ON and Engine Stop.

2. DTC check

Check ECM for DTC referring to DTC Check DTC Check.

Is DTC P1636 or P1638 detected?
YES -
Go to applicable DTC troubleshooting.
NO -
Go to Step 3.

3. Immobilizer indicator light flash check

Does immobilizer indicator light flash on and off continuously in Step 1?
YES -
Check ECM for DTC referring to DTC Check DTC Check. Then, go to applicable DTC troubleshooting.
NO -
Go to Step 4.

4. Engine start check

Start engine using ignition key.

Does engine start?
YES -
Go to Step 5.
NO -
Go to Engine and Emission Control System Check Engine and Emission Control System Check.

5. Immobilizer indicator light remains ON check

Check if immobilizer indicator light remains ON after engine starts.

Does immobilizer indicator light remains ON after engine starts?
YES -
Go to Immobilizer Indicator Light Remains ON after Engine Starts Immobilizer Indicator Light Remains ON after Engine Starts.
NO -
Immobilizer control system is in good condition. Then, go to Keyless Start System Check Keyless Start System Check
for keyless start model.