DTC Check

OUTPUT OF DTC







1. Turn the ignition switch ON.
2. Using SST, connect terminal Tc and E1 of DLC1.

SST 09843-18020 (Diagnosis Check Wire)

2. Read the DTC code on the CRUISE MAIN indicator light.

Diagnosis Circuit:

HINT: If the diagnostic code is not output, inspect the diagnosis circuit.







As an example, the blinking patterns for codes, normal, 11 and 21 are shown in the illustration.


3. Check for the problem using the DTC table.
4. After completing the check, disconnect terminal Tc and E1, and turn off the display.