Displaying & Reading Trouble Codes

NOTE: This is the only information provided by the manufacturer for reading diagnostic trouble codes for this system.

PRE-CHECK

1. POWER WINDOW OPERATION MODE

HINT: Initial condition that the customizing function by hand-held tester is not chosen is shown.




Standard:

2. POWER WINDOW FAIL-SAFE FUNCTION
a. When an abnormality is detected in the limit switch and pulse sensor for operating the jam protection function, the following power window operations will be prohibited for fail-safe.




Standard:

3. CHECK HAND-HELD TESTER
a. ECU Data Monitor:
1. Using the hand-held tester, make a judgement of good or bad and find out a malfunctioning part by the ECU data monitor.




Standard:
Door ECU (driver's side) (switch condition)




Door ECU (driver's side) (jam protection threshold)

b. Active Test:
1. Using the hand-held tester, make a judgement of good or bad and find out a malfunctioning pan by the active test.




Standard:
Door ECU (driver's side)

c. Customizing Function (reference):
1. Using the hand-held tester, select the following controls on power window.




Standard:
Door ECU (driver's side)