ABS w/ EBD & BA & TRAC & VSC System

DIAGNOSTIC TROUBLE CODE CHART

NOTE: When removing the part, turn the ignition switch OFF.

HINT:
- Using SST 09843-18040, connect the terminals and Tc and CG of DLC3.
- If any abnormality is not found when inspecting parts, inspect the ECU.
- If a malfunction code is displayed during the DTC check, check the circuit listed that code. For details of each code, refer to the respective "DTC No." in the DTC chart.

ABS C0200 - C1239:

ABS C1241 - C1337:

DTC Chart of ABS

*1: As the DTC cannot be erased by replacing parts alone do either of the following operations.
1. Clear DTC
2. AT the vehicle speed of 20 km/h (12 mph), drive the vehicle for 30 sec. or more.

*2: Using the table, troubled parts can be specified.
*3: 4WD

VSC C1201 - C1380, Always ON:

DTC Chart of VSC

HINT: There is a case that hand-held tester cannot be used when ABS and/or VSC warning light is always on.

C1271 - C1283:

DTC of ABS sensor check function

C0371 - C1379:

DTC of VSC sensor check function