Operation CHARM: Car repair manuals for everyone.

Problem Symptom Confirmation (Road Test)

PROBLEM SYMPTOM CONFIRMATION (ROAD TEST)







a. Inspect the SET switch.
1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Push down the control switch to the -/SET
4. After releasing the switch, check that the vehicle cruises at the desired speed.







b. Inspect the '+' switch.
1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Check that the vehicle speed increases while the control switch is pull up to +/RES, and that the vehicle cruises at the set speed when the switch is released.
4. Momentarily push the control switch upward to the +/RES, and then immediately release it. Check that the vehicle speed increases by about 1.5 km/h (Tap-up function).








c. Inspect the '-' switch.
1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Check that the vehicle speed decreases while the control switch is push down to -/SET, and the vehicle cruises at the set speed when the switch is released.
4. Momentarily push the control switch downward to -/SET, and then immediately release it. Check that the vehicle speed decreases by about 1.5 km/h (Tap-down function).







d. Inspect the CANCEL switch.
1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal.
- Shift to except D position.
- Push the main switch button to OFF.
- Pull the control switch to CANCEL.








e. Inspect the RES switch.
1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal.
- Shift to except D position.
- Pull the control switch to CANCEL.

4. After the control switch is pull up to +/RES at the driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.