Diagnosis System Mode

Diagnosis System Mode:

DIAGNOSIS SYSTEM MODE

A. Start-up And Finishing Of The Diagnosis

HINT: Before starting the Diagnosis System, make sure that the map appears on the screen after turning on the IG switch. If not, some items cannot be checked.










B. Diagnosis Start-up by light control switch.
1. Vehicle speed should be 0 km/h (0 mph).
2. Apply the parking brake.
3. Turn the ignition switch to ACC or ON.
4. While pressing the "INFO" switches on the Multi Display, turn the Light Control switch from OFF -> TAIL -> OFF -> TAIL -> OFF -> TAIL -> OFF.

HINT: When Diagnosis System starts, Service Check screen is displayed and the service check begins.
Select MENU to display Diagnosis Check Menu.







C. Diagnosis Start-Up by touch switch.
1. Vehicle speed should be 0 km/h (0 mph).
2. Apply the parking brake.
3. Turn the ignition switch to ACC or ON.
4. Activate the screen adjustment screen.
5. Alternately touch the upper and lower bottom parts of the left end of the screen 3 times.

D. Finishing the Diagnosis System
Turn the ignition switch off to finish the mode.