ABS w/ EBD & BA & TRAC & VSC System

DIAGNOSTIC TROUBLE CODE CHART

NOTE: Before replacing or removing the part, turn the ignition switch OFF.

HINT:
- Using SST 09843-18040, connect the terminals Tc and CG of DLC3.
- If any abnormality is not found when inspecting parts, inspect the ECU.
- If a malfunction code is displayed during the DTC check, check the circuit listed for that code. For details of each code, refer to respective "DTC No." in the DTC chart.

C0200 - C1239:

C1241 - C1267, Always ON:

DTC Chart Of ABS

- *1: These DTC will not affect to cancel the ABS warning light by repairing the trouble area, so perform the following operations.

1. Drive the vehicle at 20 km/h (12 mph) for 30 seconds or more and check that the ABS warning light goes off.
2. Clear the DTC.

- *2: These DTC will not affect to cancel the ABS warning light by repairing the trouble area, so perform the following operations.

1. Keep the vehicle in the stationary condition for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
2. Driving the vehicle at the vehicle speed 50 km/h (31 mph) and keep depressing the brake pedal strongly for about 3 seconds.
3. Repeat the above operation 3 times or more and check that the ABS warning light goes off.
4. Clear the DTC.

HINT: There is a case that hand-held tester cannot be used when ABS warning light is always on.

C1201 - 1210:

C1336 - C1335, Always ON:

DTC Chart Of VSC

HINT: There is a case that hand-held tester cannot be used when VSC warning indicator is always on.

C1271 - C1281:

DTC Of ABS Sensor Check Function

C0371:

DTC Of VSC Sensor Check Function