C2114

DTC C2114 TRANSMITTER ID4 OPERATION STOP

CIRCUIT DESCRIPTION

DTC Detecting Condition:

The tire pressure monitor valve sub-assy stops transmitting signals when receiving specific signals. The ECU stores the DTC when the tire pressure monitor valve sub-assy receives the signals, for some reason, and stops transmitting signals. As this is not a system malfunction, the DTC is erased when signal transmission is resumed.

HINT: The electric wave is stopped at assembly plant, because the strength of the electric wave emitting from the tire pressure sensing transmitter does not comply with the Japan Wireless Telegraphy Act.

HINT: It is necessary to perform the procedure to identify the tire pressure monitor valve sub-assy that is malfunctioning because it cannot be identified by the output DTC.

Step 1:

Step 2 - 6:

Step 7 - 8:

Step 9 - 13:

Step 14:

INSPECTION PROCEDURE

HINT: Set the tire pressure to the specified value.