Entertainment Systems

DIAGNOSTIC TROUBLE CODE CHART






HINT: The DTC of the Main AVC-LAN circuit is displayed on the radio receiver assy or multi-display, and the DTC of the Sub AVC-LAN circuit is displayed on the television display assy.

Titles for each unit are stated in the following order: physical address, (parts name) and [name indicated on the DTC display].

1. MULTI-DISPLAY CONTROLLER SUB-ASSY (Physical address: 16C, 16D) [RSE-ECU]

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: This code is stored 180 seconds after the power supply connector is disconnected after engine start.
- *3: This code may be stored when the engine key is turned back to the ON position and then turned again to the START position after engine start.
- *4: This code may be stored when the engine key is turned back to the ON position and then turned again to the START position in 1 minute after engine start.







a. Logical address: 01 (Communication control)

2. TELEVISION DISPLAY ASSY (Physical address: 1B0) [Rr-TV]

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting the engine.
- *2: This code may be stored when the engine key is turned again in 1 minute after the engine start.
- *3: This code may be stored when the engine key is turned again after the engine start.
- *4: The code is stored 210 seconds after the power supply connector of the master component is disconnected with the ignition switch in the ACC or ON position.







a. Logical address: 01 (Communication control)




b. Logical address: 44 (DVD)