Radio, Stereo, and Compact Disc
DIAGNOSTIC TROUBLE CODE CHART
1. PIONEER MADE:
RADIO RECEIVER ASSEMBLY (Physical address: 190)
HINT:
- *1: Even if no failure is detected, it may be stored depending on the battery condition or voltage for starting an engine.
- *2: It is stored when 180 sec. has passed after the power supply connector is pulled out after engine start.
- *3: It may be stored when the engine key is turned 1 min. after engine start.
- *4: It may be stored when the engine key is turned again after engine start.
- *5: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.
D6 - DC:
DD - E3:
a. Logical address: 01 (Communication control)
40:
b. Logical address: 61 (Cassette switch)
42 - 48:
c. Logical address: 62 (CD player)
2. STEREO COMPONENT AMPLIFIER ASSEMBLY (Physical address: 440)
HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code may be stored when the engine key is turned again 1 min. after engine start.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.
D1 - DF:
E0 - E3:
Logical address: 01 (Communication control)
3. STEREO COMPONENT CONTROLLER ASSEMBLY
HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code may be stored when the engine key is turned again 1 min. after engine start.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: When 210 sec. has passed after pulling out the power supply connector of the master component with the ignition switch in ACC or ON, this code is stored.
D6 - DD:
DF - E4:
Logical address: 01 (Communication control)