DTC 01-D7

DTC 01-D6 No Master
DTC 01-D7 Connection Check Error

DTC Detection Condition:

DESCRIPTION

NOTE:
- Be sure to clear and recheck DTCs and perform inspection according to the result to avoid the conditions shown in the "HINT" above.
- The multi-display controller is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.

Step 1:

Step 2-3:

Step 3(Continued)-5:

Step 5(Continued)-6:

INSPECTION PROCEDURE


NOTE: Be sure to read DESCRIPTION before performing the following procedures.