DTC 01-E1

DTC 01-DD Master Reset
DTC 01-E1 Voice Processing Device ON Error

DTC Detection Condition:

DESCRIPTION

Step 1:

Step 1-3:

Step 3(Continued):

Step 4(Continued)-5:

INSPECTION PROCEDURE


NOTE:
- Before starting troubleshooting, be sure to clear DTCs to erase codes stored due to the reasons described in the HINT above. Then, check for DTCs and troubleshoot according to the output DTCs.
- The radio receiver is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.

NOTE:Be sure to read DESCRIPTION before performing the following procedures.