DTC 01-D9

DTC 01-D5 Absence of Registration Unit
DTC 01-D8 No Response for Connection Check
DTC 01-D9 Last Mode Error
DTC 01-DA No Response Against ON / OFF Command
DTC 01-DB Mode Status Error
DTC 01-DE Slave Reset

DTC Detection Condition:

DESCRIPTION

NOTE:
- Be sure to clear and recheck DTCs and perform inspection according to the result to prevent the above "HINT".
- The multi-display controller is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.

Step 1:

INSPECTION PROCEDURE


NOTE: Be sure to read DESCRIPTION before performing the following procedures.