B2223
DTC B2223 Power Slide Door Pulse Sensor Malfunction on Rear Right DoorDESCRIPTION
- A pulse sensor is built into slide door RH for jam and foreign object detection and for slide door position detection. The jam and foreign object detection feature of the pulse sensor monitors the operating speed of the slide door while the power slide door is in operation. The slide door position detection feature of the pulse sensor monitors where the slide door is. If the slide door position detection feature outputs a pulse signal that is out of the normal range, the power slide door ECU RH will set DTC B2223.
- If DTC B2223 is set, the power slide door system will be turned off. Thus, the slide door can be moved freely and will be switched to manual operation mode (not electrically controlled).
- In order to restore the power slide door system to normal operation mode, first solve the problem indicated by DTC B2223 and then manually close the slide door fully (reset operation).
DTC Detection Condition:
WIRING DIAGRAM
Wiring Diagram:
INSPECTION PROCEDURE
Step 1 - Step 2:
Step 2 (Continued):
