C1258

DTC C1258/58 Transfer 4WD Position Switch Circuit

DESCRIPTION

DTC Detecting Conditions:

This circuit monitors whether the transfer is in 2WD or 4WD mode and inputs the signal to the skid control ECU. In 2WD mode, TRAC is activated.
In 4WD mode, A-TRAC is activated.

Wiring Diagram:

INSPECTION PROCEDURE

NOTE: When replacing the master cylinder solenoid, perform zero point calibration. Calibration

Step 1-3:

Step 4:

Step 5:

Step 6-7:

Step 8: