B1651

DTC B1651/33 Manual Cut off Switch Trouble

DESCRIPTION

Detection Condition:

The manual cut off switch circuit consists of the center airbag sensor and the airbag cut-off switch cylinder.

The front passenger airbag can be optionally deactivated via this circuit by turning the manual cut off switch to the OFF position.

If the front passenger airbag is deactivated, the passenger airbag OFF indicator comes on to inform the passengers.

DTC B1651/33 is recorded when a malfunction is detected in the manual cut off switch circuit.

Wiring Diagram:

Step 1:

Step 1 (Continued)-2:

Step 3:

INSPECTION PROCEDURE

NOTE:
- When disconnecting the cable from the negative (-) battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.