C1340

DTC C1340/47 Center Differential Lock Circuit

DESCRIPTION

DTC Detection Condition:

When the vehicle is changed to 4WD, VSC control turns off and the VSC OFF indicator illuminates.

Wiring Diagram:

Step 1-2:

Step 3-4:

INSPECTION PROCEDURE

NOTE: When replacing the VSC actuator assembly, perform zero point calibration. Calibration

HINT: If the transfer shift actuator cannot change from 2WD to 4WD or 4WD to 2WD, inspect and repair the touch select 2-4 and high-low system first.