P060E

3MZ-FE ENGINE CONTROL SYSTEM: SFI SYSTEM: P060E: Internal Control Module Throttle Position Performance

DTC P060E - Internal Control Module Throttle Position Performance

DESCRIPTION

The ECM (included in the hybrid vehicle control ECU) monitors the input signals of the throttle position sensor No. 1. As the ECM monitors the input signals of the throttle position sensor No. 1, if the input signals deviated, a DTC is output.






MONITOR STRATEGY





TYPICAL ENABLING CONDITIONS





TYPICAL MALFUNCTION THRESHOLDS





INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC
(a) Clear the DTCs DTC Check / Clear.
(b) Turn the power switch off.
(c) Disconnect the cable from the negative battery terminal and wait for 1 minute.
(d) Connect the cable to the negative battery terminal.
(e) Turn the power switch on (IG).
(f) Check for DTCs.
OK:
P060E is not present.
NG -- REPLACE HYBRID VEHICLE CONTROL ECU
OK -- CHECK FOR INTERMITTENT PROBLEMS