B2793

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2793: Transponder Chip Malfunction

DTC B2793 - Transponder Chip Malfunction

DESCRIPTION

This DTC is output when a malfunction is found in the key during the key code registration or the key code is not registered normally. Replace the key when the key code registration is not performed normally and this DTC is detected.






INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT
(a) Delete the DTC .
(b) Insert the key into the ignition key cylinder.
(c) Check that no code is output.
OK:
No DTC is output.
OK -- END
NG -- Continue to next step.
2. RE-REGISTER KEY
(a) Delete the DTC .
(b) Re-register the key and insert this key into the ignition key cylinder.
Check that the engine starts with the key.
OK:
The engine starts
OK -- END
NG -- REPLACE KEY