C1225

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C1225/25: SM Solenoid Circuit

DTC C1225/25 - SM Solenoid Circuit

DESCRIPTION

This solenoid turns on when receiving signals the ECU and controls the pressure acting on the wheel cylinders to control the braking force.






WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. RECONFIRM DTC
(a) Clear the DTCs .
(b) Turn the ignition switch to the ON position.
(c) Are the same DTCs recorded?
Result:





NOTE: When replacing brake actuator assembly, perform zero point calibration .

B -- END
A -- REPLACE BRAKE ACTUATOR ASSEMBLY