P1572

CRUISE CONTROL: DYNAMIC LASER CRUISE CONTROL SYSTEM: P1572: Improper Aiming of Radar Sensor Beam Axis

DTC P1572 - Improper Aiming of Radar Sensor Beam Axis

DESCRIPTION

This DTC is output when the scanning angle of the laser sensor is incorrect. This DTC is also output when the laser sensor beam axis is determined to be in an incorrect position.






INSPECTION PROCEDURE
NOTE: When the laser sensor is replaced with a new one, adjustment of the laser sensor beam axis must be performed .

PROCEDURE

1. ADJUST LASER SENSOR
Refer to adjustment .
HINT: It is necessary to make the ECM recognize specification information (whether the vehicle is equipped with the dynamic laser cruise control system or not). When this procedure has not been carried out, this DTC may be output.
(a) Clear the DTCs and then recheck for DTCs.
OK:
DTC is not output.
NG -- REPLACE LASER SENSOR
OK -- SYSTEM IS OK