How to Proceed With Troubleshooting

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING

*: Use Techstream.
1. Vehicle Brought to Workshop
-- Continue to next step.
2. Check and Clear DTCs and Freeze Frame Data* Vehicle Stability Control System and Freeze Frame Data.

-- Continue to next step.
3. Problem Symptom Confirmation
-- Symptom does not occur: Go to step 5
-- Symptom occurs: Go to step 6
4. Symptom Simulation
-- Continue to next step.
5. DTC Check* Vehicle Stability Control System.

-- There is no output: Go to step 7
-- There is output: Go to step 8
6. Problem Symptoms Table Problem Symptoms Table.

-- Check for fluid leakage and Go to step 10
7. DTC Chart Diagnostic Trouble Code Descriptions.

-- Continue to next step.
8. Circuit Inspection*
-- Continue to next step.
9. Identification of Problem
-- Continue to next step.
10. Repair
-- Continue to next step.
11. Confirmation Test*
-- End