Slip Indicator Light Remains ON

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: Slip Indicator Light Remains ON

Slip Indicator Light Remains ON

DESCRIPTION

- The SLIP indicator blinks when any of the TRAC, VSV and AUTO LSD operate.
- When the system fails, the SLIP indicator light illuminates to warn the driver.

WIRING DIAGRAM





INSPECTION PROCEDURE

HINT: Start the inspection from step 1 when using Techstream and start from step 2 when not using Techstream.

PROCEDURE

1. CHECK DTC
(a) Check the DTCs.





B -- REPAIR CIRCUITS INDICATED BY OUTPUT DTCS
A -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - COMBINATION METER)





(a) Disconnect the skid control ECU connector.
(b) Disconnect the combination meter connector.
(c) Measure the resistance.
Standard:





(d) Measure the resistance.
Standard:





(e) Reconnect the combination meter connector.
(f) Reconnect the skid control ECU connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. INSPECT COMBINATION METER ASSEMBLY
(a) Check the combination meter system (Problem Symptoms Table).
OK:
Combination meter is normal.
NG -- REPLACE COMBINATION METER ASSEMBLY
OK -- REPLACE MASTER CYLINDER SOLENOID