Removal

1GR-FE COOLING: THERMOSTAT:

REMOVAL

HINT: If the thermostat is not installed, cooling efficiency will be reduced. Do not remove the thermostat, to prevent the engine overheating.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. DRAIN ENGINE COOLANT (Service and Repair)

3. REMOVE V-BANK COVER (Removal)

4. REMOVE NO.2 RADIATOR HOSE





5. REMOVE WATERY INLET WITH THERMOSTAT
(a) Remove the 3 nuts, then remove the water inlet with thermostat and gasket.