Removal

1GR-FE CHARGING: GENERATOR:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE V-BANK COVER

3. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH

4. REMOVE FAN SHROUD

5. REMOVE GENERATOR ASSEMBLY





(a) Disconnect the wire harness.
(1) Remove the bolt and wire harness stay.
(2) Disconnect the connector from the generator assembly.
(3) Remove the terminal cap and nut.
(4) Disconnect the wire harness from terminal B.





(b) Remove the 2 bolts, then separate the wire harness clamp bracket from the generator assembly.





(c) Remove the 2 bolts, then remove the generator assembly.