Removal

FRONT PROPELLER SHAFT ASSEMBLY (for 4WD):

REMOVAL

1. REMOVE EXHAUST FRONT PIPE ASSEMBLY NO. 2 (for 1GR-FE)






2. REMOVE PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY
(a) Remove the 2 bolts and propeller shaft heat insulator bracket.
3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY





(a) Place matchmarks on the propeller shaft flange and differential flange.
(b) Remove the 4 nuts, 4 bolts, 4 washers and front propeller shaft.






(c) Place matchmarks on the propeller shaft flange and transfer flange.
(d) Remove the 4 nuts, 4 washers and front propeller shaft.