Speaker Circuit
NAVIGATION: NAVIGATION SYSTEM (for CrewMax): Speaker Circuit
Speaker Circuit
DESCRIPTION
The stereo component amplifier sends sound signals to the speaker.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK SPEAKER
(a) Check the malfunctioning speakers.
Result:
B -- CHECK SPEAKER
A -- Continue to next step.
2. CHECK SPEAKER
(a) Check the malfunctioning speakers.
Result:
D -- INSPECT FRONT NO. 4 SPEAKER
C -- INSPECT FRONT NO. 3 SPEAKER
B -- INSPECT FRONT NO. 2 SPEAKER
A -- Continue to next step.
3. INSPECT FRONT NO. 1 SPEAKER
(a) Disconnect the M8 and N10 speaker connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE FRONT NO. 1 SPEAKER
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - FRONT NO. 1 SPEAKER)
(a) Disconnect the M8 and N10 speaker connectors.
(b) Disconnect the K17 amplifier connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
for RH
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE STEREO COMPONENT AMPLIFIER
5. INSPECT FRONT NO. 2 SPEAKER
(a) Disconnect the K10 and K12 speaker connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
Standard resistance:
for RH
NG -- REPLACE FRONT NO. 2 SPEAKER
OK -- Continue to next step.
6. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - FRONT NO. 2 SPEAKER)
(a) Disconnect the K16 amplifier connector.
(b) Disconnect the K10 and K12 speaker connectors.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
for RH
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE STEREO COMPONENT AMPLIFIER
7. INSPECT FRONT NO. 3 SPEAKER
(a) Disconnect the M1 and N1 speaker connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE FRONT NO. 3 SPEAKER
OK -- Continue to next step.
8. CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER - FRONT NO. 3 SPEAKER)
(a) Disconnect the M1, N1, K10 and K12 speaker connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
for RH
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE FRONT NO. 2 SPEAKER
9. INSPECT FRONT NO. 4 SPEAKER
(a) Disconnect the K14 speaker connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE FRONT NO. 4 SPEAKER
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - FRONT NO. 4 SPEAKER)
(a) Disconnect the K14 speaker connector.
(b) Disconnect the K17 amplifier connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE STEREO COMPONENT AMPLIFIER
11. CHECK SPEAKER
(a) Check the malfunctioning speakers.
Result:
C -- INSPECT BOX SPEAKER
B -- INSPECT REAR NO. 1 SPEAKER
A -- Continue to next step.
12. INSPECT REAR NO. 2 SPEAKER
(a) Disconnect the O2 and O8 speaker connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE REAR NO. 2 SPEAKER
OK -- Continue to next step.
13. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - REAR NO. 2 SPEAKER)
(a) Disconnect the K16 amplifier connector.
(b) Disconnect the O2 and O8 speaker connectors.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
for RH
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE STEREO COMPONENT AMPLIFIER
14. INSPECT REAR NO. 1 SPEAKER
(a) Disconnect the O1 and O7 speaker connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE REAR NO. 1 SPEAKER
OK -- Continue to next step.
15. CHECK HARNESS AND CONNECTOR (REAR NO. 1 SPEAKER - REAR NO. 2 SPEAKER)
(a) Disconnect the O1, O2, O7 and O8 speaker connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
for RH
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE REAR NO. 2 SPEAKER
16. INSPECT BOX SPEAKER
(a) Disconnect the P14 speaker connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE BOX SPEAKER
OK -- Continue to next step.
17. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - BOX SPEAKER)
(a) Disconnect the K17 amplifier connector.
(b) Disconnect the P14 speaker connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE STEREO COMPONENT AMPLIFIER