Removal

BRAKE CONTROL: STEERING ANGLE SENSOR:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE LOWER NO. 3 STEERING WHEEL COVER (Removal)

4. REMOVE LOWER NO. 2 STEERING WHEEL COVER (Removal)

5. REMOVE STEERING PAD (Removal)

6. REMOVE STEERING WHEEL ASSEMBLY (Removal)

7. REMOVE LOWER STEERING COLUMN COVER (Removal)

8. REMOVE UPPER STEERING COLUMN COVER (Removal)

9. REMOVE SPIRAL CABLE SUB-ASSEMBLY (Removal)

10. REMOVE STEERING ANGLE SENSOR (Removal)