C1300

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C1300/62: Skid Control ECU Malfunction

DTC C1300/62 - Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the ECU by self-diagnosis.





INSPECTION PROCEDURE

NOTE: When replacing the VSC actuator assembly, perform zero point calibration (Programming and Relearning).

PROCEDURE

1. RECONFIRM DTC
(a) Clear the DTC(s) (Reading and Clearing Diagnostic Trouble Codes).
(b) Turn the ignition switch to ON.
(c) Check if the same DTC is output (Reading and Clearing Diagnostic Trouble Codes).

Result





B -- USE SIMULATION METHOD TO CHECK
A -- REPLACE VSC ACTUATOR ASSEMBLY