C2176

TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2176/76: Receiver Error

DTC C2176/76 - Receiver Error

DESCRIPTION

The signals are transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the tire pressure warning ECU.





INSPECTION PROCEDURE

NOTICE:
- When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
- It is necessary to perform initialization (Initialization) after registration (Registration) of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced.

PROCEDURE

1. CLEAR DTC
(a) Clear the DTC (Reading and Clearing Diagnostic Trouble Codes).
(b) Turn the ignition switch off.
NEXT -- Continue to next step.
2. CHECK DTC
(a) Check for DTC.

Result





B -- USE SIMULATION METHOD TO CHECK
A -- REPLACE TIRE PRESSURE WARNING ECU