Removal

LIGHTING: IGNITION KEY CYLINDER LIGHT:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. REMOVE LOWER STEERING COLUMN COVER (Removal)

3. REMOVE UPPER STEERING COLUMN COVER (Removal)

4. REMOVE IGNITION KEY CYLINDER LIGHT





(a) Disconnect the unlock warning switch connector.
(b) Detach the 2 claws.
(c) Disconnect the connector and remove the key cylinder light.