Brake Lamp Relay: Testing and Inspection

LIGHTING: STOP LIGHT CONTROL RELAY: INSPECTION

INSPECTION

1. INSPECT STOP LIGHT CONTROL RELAY ASSEMBLY





(a) Disconnect the S36 stop light control relay connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:





If the result is not as specified, repair or replace the wire harness or connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





If the result is not as specified, repair or replace the wire harness or connector.





(d) Reconnect the S36 stop light control relay connector.
Standard Voltage:





If the result is not as specified, replace the stop light control relay.