Removal

1GR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

REMOVAL

1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2
2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2
4. REMOVE ECM





(a) Disconnect the 5 the ECM connectors from the ECM.
(b) Remove the 3 nuts and the ECM.
(c) Remove the 2 screws and the ECM bracket No. 1 from the ECM.
(d) Remove the 2 screws and the ECM bracket No. 2 from the ECM.