Manual Up / Down Function Does Not Operate On Passenger Side Only

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Manual Up / Down Function does not Operate on Passenger Side Only

Manual Up / Down Function does not Operate on Passenger Side Only

DESCRIPTION

If the manual UP/DOWN function does not operate, the power window motor, the power window switch or the wire harness is abnormal.

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1. CHECK WIRE HARNESS (POWER SOURCE)

(a) Disconnect the P9 switch connector.
(b) Turn the ignition switch ON.
(c) Check the voltage between terminal 4 of the wire harness side connector of the switch and the body ground.
Standard voltage:
10 to 14 V

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (SWITCH - RELAY)
OK -- Continue to next step.

2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (PASSENGER SIDE)

(a) Remove the power window switch.
(b) Check the continuity between the terminals of the switch connector when the switch is operated.
Standard resistance:

NG -- REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY
OK -- Continue to next step.

3. CHECK WIRE HARNESS (SWITCH - MOTOR) (SWITCH - BODY GROUND)

(a) Disconnect the P13 motor connector.
(b) Check the continuity between the wire harness side connectors.
Standard resistance:

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

4. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

(a) Remove the motor.
(b) Apply battery voltage to connector terminals 1 and 2.
(c) Check that the motor rotates smoothly.
Standard:

NG -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR (MASTER SWITCH - SWITCH)