Installation

2UZ-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: INSTALLATION

INSTALLATION

1. INSPECT THROTTLE W/MOTOR BODY ASSEMBLY





(a) Install a new gasket and the throttle body with the 3 bolts and nut.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)





(b) Connect the water by-pass hose, water by-pass hose No. 7 and throttle position sensor connector.
2. INSTALL AIR CLEANER HOSE ASSEMBLY
3. ADD ENGINE COOLANT Service and Repair
4. CHECK FOR ENGINE COOLANT LEAKS Service and Repair
5. INSTALL THROTTLE BODY COVER SUB-ASSEMBLY
(a) Install the throttle body cover sub-assembly with the 2 nuts.
Torque: 7.5 Nm (80 kgf-cm, 66 in-lbf)