Seat Temperature Switch: Testing and Inspection

SEAT: SEAT HEATER SWITCH: INSPECTION

INSPECTION

1. INSPECT SEAT HEATER SWITCH LH





(a) Check the resistance between the terminals when the switch is operated.
Standard resistance:





(b) Inspect the seat heater switch indicator.
(1) Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 1.
(2) Push the seat heater switch ON and check that the indicator lights up.
If the result is not as specified, replace the seat heater switch and inspect the circuits connected to the other parts.





(c) Inspect the seat heater switch illumination.
(1) Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 5.
(2) Check that the illumination lights up.
If the result is not as specified, replace the seat heater switch or bulb.
2. INSPECT SEAT HEATER SWITCH RH





(a) Check the resistance between the terminals when the switch is operated.
Standard resistance:





(b) Inspect the seat heater switch indicator.
(1) Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 1.
(2) Push the seat heater switch ON and check that the indicator lights up.
If the result is not as specified, replace the seat heater switch and inspect the circuits connected to the other parts.





(c) Inspect the seat heater switch illumination.
(1) Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 5.
(2) Check that the illumination lights up.
If the result is not as specified, replace the seat heater switch or bulb.