B2795

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM (w/o Smart Key System): B2795: Unmatched Key Code

DTC B2795 - Unmatched Key Code

DESCRIPTION

This DTC is output when a key with a key code that has not been registered in the ECU is inserted into the ignition key cylinder.






INSPECTION PROCEDURE
NOTE: If the key is replaced, register the key Engine Immobiliser System (W/O Smart Key System).

PROCEDURE

1. CLEAR DTC
(a) Delete the DTCs Engine Immobiliser System (w/o Smart Key System).
NEXT -- Continue to next step.
2. RE-REGISTER KEY
(a) Re-register the key Engine Immobiliser System (W/O Smart Key System).
NEXT -- Continue to next step.
3. CHECK ENGINE START
(a) Check that the engine starts.
OK:
The engine starts.
NG -- REPLACE KEY
OK -- END (PROBLEM WITH KEY REGISTRATION IS DEFECTIVE)