Removal

AIR CONDITIONING: CONDENSER: REMOVAL

REMOVAL

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair
2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE RADIATOR GRILLE Removal
4. REMOVE NO. 2 AIR CLEANER INLET (for 1AR-FE) Removal
5. REMOVE NO. 2 AIR CLEANER INLET (for 2GR-FE) Removal
6. REMOVE NO. 1 AIR CLEANER INLET (for 1AR-FE) Removal
7. REMOVE NO. 1 AIR CLEANER INLET (for 2GR-FE) Removal
8. REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch) Removal
9. REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch) Removal
10. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 1AR-FE) Removal
11. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 2GR-FE) Removal
12. DISCONNECT DISCHARGE TUBE SUB-ASSEMBLY





(a) Remove the bolt and disconnect the discharge tube sub-assembly from the condenser.
(b) Remove the O-ring from the discharge tube sub-assembly.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

13. DISCONNECT COOLER REFRIGERANT LIQUID PIPE A





(a) Remove the bolt and disconnect the cooler refrigerant liquid pipe A from the condenser.
(b) Remove the O-ring from the cooler refrigerant liquid pipe A.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

14. REMOVE COOLER CONDENSER ASSEMBLY





(a) Remove the 4 bolts.





(b) Remove the cooler condenser assembly as shown in the illustration.